
pH transmitter
8 variants, (0)4…20mA or 0…5(10)V output
- For connecting pH sensors, e.g. pH 110 TE
- 8 variants:
- 0…20mA, 4…20mA, 0…5V or 0…10V output
- 12V or 24V DC operating voltage
- automatic temperature compensation
- galvanic isolation
- in a practical DIN-rail housing
- Made in Germany
ab €198.00 net
Function
The device converts the high-impedance input signal of the pH sensor into a low-impedance output signal of 0(4)…20mA or 0…5/10V.
Input and output are galvanically isolated. Fluctuating temperatures of the medium are compensated by automatic temperature compensation.
Advantages
Fully analogue:
The transmitters are equipped exclusively with analogue components. There is no falsification of the measurement results due to analogue/digital conversion.
Connection diagram
Temperature compensation
Zur Temperature compensation a 110 ohm fixed resistor or a Pt100 temperature sensor is required. The fixed resistor is connected to the transmitter ex works.
Leave the fixed resistor on the device if the pH measurement takes place in the temperature range 20…30°C. In this case, no Pt100 is required.
If the pH measurement takes place at varying temperatures or outside the range 20…30°C, a Pt100 must be used. Remove the fixed resistor and connect the Pt100 to terminals 5+6.
Note:
Terminals 5+6 must always be connected: connect either a fixed resistor or a Pt100.
Technical data
| pH measuring input: | 2…12 / 0…14pH Adjustable by calibrating the slope |
| Output: | 0…20mA, 4…20mA, 0…5V or 0…10V according to the type plate |
| Accuracy, linearity [% of full scale]: | ±0.5 |
| Input resistance [ohm]: | 1012 |
| Temperature compensation: | Pt100 or fixed resistor 110 ohm Compensation according to the pH characteristic |
| Operating voltage [V]: | 12V DC or 24V DC opt. (±10%, regulated) according to the type plate. It is essential to use a regulated supply voltage. |
| Ambient temperature [°C]: | 0…60 |
| Degree of protection: | IP 20 |
| Current consumption [mA]: | max. 70 |
| Dimensions, H x W x D [mm]: | 75 x 60 x 30 |
| Weight [g]: | 70 |
Items & prices
| Art.-Nr. | Description | Net price | Order / enquire |
|---|---|---|---|
| 1-0021-0410-1 | Output: 4 - 20mA, supply voltage: 24V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 | |
| 1-0021-0410-2 | Output: 0 - 20mA, supply voltage: 24V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 | |
| 1-0021-0410-3 | Output: 4 - 20mA, supply voltage: 12V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 | |
| 1-0021-0410-4 | Output: 0 - 20mA, supply voltage: 12V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 | |
| 1-0021-0410-5 | Output: 0 - 5V, supply voltage: 24V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 | |
| 1-0021-0410-6 | Output: 0 - 10V, supply voltage: 24V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 | |
| 1-0021-0410-7 | Output: 0 - 5V, supply voltage: 12V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 | |
| 1-0021-0410-8 | Output: 0 - 10V, supply voltage: 12V DCpH transmitter with galvanic isolationMeasuring range: 2…12pH or 0…14pHCalibration setting on the device | €198.00 |
All prices in euros net plus statutory VAT and shipping costs. Errors and changes excepted. Our terms and conditions apply: AGB.


