Albert-Einstein-Straße 1, 49076 Osnabrück, Germany +49 541 959 88 44 0 info@imp24.de
imp ingenieurgesellschaft mbh Request list
LMA-LED conductivity meter with integrated electronics

Conductivity sensors

LMA-LED

Conductivity meter with integrated electronics

  • Programmable conductivity meter
    • LED display green, green-red, red
    • with switching output and acoustic signal
    • with analogue output 0/4…20mA
  • conductive measurement of specific electrical conductivity in liquids
  • Temperature measurement 0…100°C with Pt1000
  • Made in Germany

ab €56.00 net

Description

Electrolytic conductivity is, alongside the pH value, the most important parameter in chemical process analysis.
It is a measure of the ability of an aqueous solution to conduct electric current. All processes in which salts, acids and bases play a role can thus be monitored, controlled or regulated by measurement.

The conductivity meters of the LMA-LED series combine a programmable measuring range, visual display, acoustic alarm and analogue output in a compact housing, making them extremely versatile.

Application

From water treatment to industrial process water with high demands in terms of temperature, pressure, tolerance of contamination and chemical resistance.

Outputs

The display ranges for the LED display green - green/red - red can be freely selected within the chosen conductivity measuring range.

Der Optocoupler can alternatively be used as an opto relay or as a frequency output 0…100 Hz. The input variable is conductivity or temperature. The switching threshold can be freely selected within the chosen measuring range.

The switching point for the acoustic alarm can be freely selected within the chosen conductivity measuring range.

The values are programmed ex works according to customer specifications; please download the configuration software, make the settings and export a configuration file. Please supply this file with your order.
Alternatively, you can set the values with the configuration software and load them onto the device on site using the configuration cable.

Dimensions
Dimensions LMA-I and LMA-LED
Pin assignment
PCB LMA-LED
1 + 2: Switching output max. 30V / 50mA
3: Operating voltage +UB
4: Operating voltage GND
5: Signal output 4…20mA
6: Signal GND

Note:
Recommended connection: 0.25…0.34mm²; strip 10mm of stranded wire and tin.

Technical data
Measuring surfaces: ZK0.01: stainless steel 1.4404
ZK1, ZK0.1: graphite
Cell shaft: PP / PVDF (optional)
Materials in contact with the medium: ZK 0.01, ZK0.1: stainless steel 1.4404 and EPDM
ZK1: titanium, graphite, EPDM
Screw-in thread: 3/4"
Programmable measuring ranges: ZK1: from 0…100µS to 0…200mS in 11 steps
ZK0.1: from 0…10µS to 0…1mS in 7 steps
ZK0.01: from 0…100nS to 0…100µS in 10 steps
Measuring accuracy: ±3% of reading
Temperature measuring range [°C]: 0…100, Pt1000 Kl. B1
Temperature resistance of measuring cells: 0…60°C (PP)
0…110°C (PVDF)
Pressure resistance: 16 bar up to 60°C (PP)
16 bar up to 110°C (PVDF)
Degree of protection: IP 65
Display: 3 colours (green / green-red / red)
Temperature compensation: lin. 0…6%/°C
nat. 2.2%/°C
Reference temperature [°C]: 20/25
Galvanic isolation of measuring input: Ja
Analogue output: 0(4)…20mA
Limit signal: acoustic alarm (piezo element)
Limit output: 1x optocoupler
Current carrying capacity of the optocoupler [mA]: 50
Ambient temperature [°C]: -20…50
Operating voltage [V]: 24V DC ±10%
also available with 12V DC on request
Current consumption [mA]: <50mA
Cable connection: 6x0.25mm²
Downloads

Items & prices

Art.-Nr.DescriptionNet priceOrder / enquire
1-0022-8000-1LMA-LED ZK1Cell shaft made of PPProgrammable from 100µS to 200msTriple LED display (green, green-red, red)Output: optocoupler, piezo beeper0/4…20mA for conductivity or temperatureScrew-in thread: 3/4"€306.00
1-0022-8005-1LMA-LED ZK1Cell shaft made of PVDFProgrammable from 100µS to 200msTriple LED display (green, green-red, red)Output: optocoupler, piezo beeper0/4…20mA for conductivity or temperatureScrew-in thread: 3/4"€346.00
1-0022-8000-01LMA-LED ZK01Cell shaft made of PPProgrammable from 10µS to 1msTriple LED display (green, green-red, red)Output: optocoupler, piezo beeper0/4…20mA for conductivity or temperatureScrew-in thread: 3/4"€286.00
1-0022-8005-01LMA-LED ZK01Cell shaft made of PVDFProgrammable from 10µS to 1msTriple LED display (green, green-red, red)Output: optocoupler, piezo beeper0/4…20mA for conductivity or temperatureScrew-in thread: 3/4"€326.00
1-0022-8000-001LMA-LED ZK001Cell shaft made of PPProgrammable from 100nS to 100µSTriple LED display (green, green-red, red)Output: optocoupler, piezo beeper0/4…20mA for conductivity or temperatureScrew-in thread: 3/4"€306.00
1-0022-8005-001LMA-LED ZK001Cell shaft made of PVDFProgrammable from 100nS to 100µSTriple LED display (green, green-red, red)Output: optocoupler, piezo beeper0/4…20mA for conductivity or temperatureScrew-in thread: 3/4"€346.00
1-0022-8090Configuration cable with PC software for LMA series€56.00

All prices in euros net plus statutory VAT and shipping costs. Errors and changes excepted. Our terms and conditions apply: AGB.