Albert-Einstein-Straße 1, 49076 Osnabrück, Germany +49 541 959 88 44 0 info@imp24.de
imp ingenieurgesellschaft mbh Request list

Knowledge

QM terms

Quality management terms


 
Abbreviation Meaning Cross-reference to
Procedure DIN ISO 9004 (5.2.5)
DIN ISO 9004-2 (4.4.3)
Offer A declaration of willingness submitted by a supplier upon request to fulfil a resulting contract for the supply of a product DIN ISO 8402
DIN EN ISO 9001 (3.2)
DIN EN ISO 9002 (3.2)
DIN EN ISO 9003 (3.2)
APQP Advanced Product Quality Planning and Control Plan. Advance quality planning and control planning (quality and inspection planning) according to QS-9000 QS-9000
APQP
AQAP NATO standards series
AQL acceptable quality level
Work instructions (WI) Documentation of an operation
Record A document that provides evidence of an activity performed or results achieved. DIN ISO 8402 (3.15)
Benchmarking Setting objectives when defining the quality policy and comparing whether the objective is achievable in-house: the objective is based, for example, on the standard of the best competitors or the market leader (see also 'Excellence', 'Leadership').
Brainstorming Brainstorming is a technique for generating and creating ideas in which the creative thinking and mental power of a group are stimulated. During an idea-generation session, as many ideas as possible should be generated without any idea being criticised or dismissed as unsuitable.
CE Conformity mark (CE mark), European regulation
CECC Conformity mark (CE mark), European regulation
Customer focus Customer orientation, see also benchmarking
Degree of demonstration The extent to which evidence is provided to create confidence that specified requirements are fulfilled. DIN ISO 8402 (4.5)
Design of Experiments (DOE) Experimental methodology that helps to reduce the number of experiments and thus make development more economical from a quality perspective.
Service The results generated by activities at the interface between supplier and customer and by internal supplier activities to meet customer needs. DIN ISO 8402 (1.5)
Legal verification Quality inspection of a measuring device with regard to the requirements of the verification regulations and, if these requirements are met, its corresponding marking. DGQ 11-04
Incoming inspection Acceptance inspection of a supplied product. DIN 55350/T17
Control limit, upper + lower (CL, UCL, LCL) Control limits
Entity Tangible or intangible object under consideration. DIN ISO 8402 (1.1)
Final inspection Last of the quality inspections before the entity is handed over to the customer. DIN 55350/T17
Excellence, leadership  In quality policy: striving for a top position or market leadership.
Defect Nonconformity. DIN ISO 8402 (2.10)
Failure Mode and Effects Analysis (FMEA) Failure mode and effects analysis: a distinction is made between several different FMEAs: process FMEA, system FMEA and product FMEA
In-process inspection Intermediate inspection of a tangible product in production. DIN 55350/T17
GLP Standards series for pharmaceutical and food technology
GMP Standards series for pharmaceutical and food technology
GSF Standards series for aerospace technology
Just-in-time method Stockholding is avoided as far as possible. The defect-free products and materials are delivered exactly when they are needed in production.
Adjustment Minimising systematic measurement deviations by modifying the measuring device, as far as necessary for the intended application. DGQ 11-04
Kaizen (Japanese: continuous improvement) In connection with quality thinking, KAIZEN is understood as the constant striving for improvement that relates to the entire company and all areas of employees' lives.
Calibration Determining the systematic measurement deviations of a measuring device without modifying the measuring device. DIN 55350/T34
Kanban (Japanese: card) The Kanban method corresponds to the just-in-time delivery method, named after the 'card' that accompanies the delivery (see just-in-time delivery). Another name is CFM = Continuous Flow Management. Basic attitude: intermediate stores indicate that the process is not under trouble-free control.
Conformity The fulfilment of specified requirements. DIN ISO 8402 (2.9)
Corrective action Action taken to eliminate the causes of an existing nonconformity, defect or other undesirable situation in order to prevent its recurrence. DIN ISO 8402 (4.14)
Force field analysis
KTA Standards series for nuclear technology
Customer The recipient of a product provided by a supplier. DIN ISO 8402 (1.9)
Requirements specification DIN ISO 9004 (7.2)
DIN ISO 9004-2 (5.1.3 / 3.2 / 3.2.1)
Lean management (lean management/flat hierarchies: self-organisation, independence and the resulting motivation
Supplier The organisation that provides a product to the customer. DIN ISO 8402 (1.10)
Management review A formal evaluation by top management of the status and adequacy of the quality management system in relation to the quality policy and objectives. DIN ISO 8402 (3.9)
Machine capability

(cm, cmk)

Machine capability
Characteristic Property for identifying or distinguishing entities. DIN 55350/T12
Model for quality assurance (QM demonstration level) A standardised or selected set of requirements for a quality management system, compiled to meet quality assurance needs in a given situation. DIN ISO 8402 (4.4)
Objective evidence Information whose truth can be proven, based on facts obtained through observation, measurement, testing or other means. DIN ISO 8402 (2.19)
New seven tools This refers to less common ways of representing more complex relationships in order to make them more transparent (relations diagrams, affinity diagrams, tree diagrams, matrix diagrams, matrix data analysis, process decision charts, network diagrams).
NLP Neuro-linguistic programming
UCL, upper control limit upper control limit.
Organisation A company, corporation, firm, enterprise or institution, or part thereof, whether incorporated or not, public or private, that has its own functions and administration. DIN ISO 8402 (1.7)
Pareto analysis
Functional specification The functional specification is the written basis for the development of new products, in which the key data of the desired development are recorded.
Often the basis of an offer or contract.
DIN ISO 9004 (7.2)
DIN ISO 9004-2 (5.1.3 / 3.2 / 3.2.1)
Poka yoke (Japanese: poka = unintentional mistake, yoke = reduction, avoidance) Comprises principles, precautions and devices for avoiding errors in production.
PPAP Production part approval process according to QS-9000. Basic requirements for production sample approval of all production and service parts. QS-9000
PPAP
APQP
ppm programme or ppm management Quality improvements to push the defect rate down to the range of defects per million units (ppm = parts per million). More realistic than the 'zero-defect programme' (see there).
Product "The result of activities and processes.", according to DIN EN ISO 9001;

- The term product can include services, hardware, processed materials, software or combinations thereof.

- In quality management, the term product does not refer to unintended by-products; this differs from ISO 8402.

DIN ISO 8402 (1.4)
DIN EN ISO 9001 (3.1)
DIN EN ISO 9002 (3.1)
DIN EN ISO 9003 (3.1)
Process A set of interrelated resources and activities that transform inputs into outputs. DIN ISO 8402 (1.2)
Process capability (cp, cpk)
Inspection sequence plan Definition of the sequence of quality inspections. DIN 55350/T11
Inspection instruction Instruction for carrying out a quality inspection. DIN 55350/T11
Inspection specification Definition of the inspection characteristics for quality inspection and, where applicable, the specified characteristic values and, where necessary, the inspection methods. DIN 55350/T11
Inspection An activity such as measuring, examining or gauging one or more characteristics of an entity and comparing them with specified requirements in order to determine whether conformity is achieved for each characteristic. DIN ISO 8402 (2.15)
QS-9000 Requirements of the "Big Three" (Chrysler, Ford and General Motors) for the quality management system of automotive suppliers. QS-9000
QSA Assessment of quality management systems according to QS-9000 QS-9000
QSA
Quality management (QM) Quality management: all activities of the overall management function that determine the quality policy, objectives and responsibilities and implement them through means such as quality planning, quality control, quality assurance and quality improvement within the quality management system. DIN ISO 8402 (3.2)
Quality The totality of characteristics of an entity that bear on its ability to satisfy stated and implied needs. DIN ISO 8402 (2.1)
Quality audit A systematic and independent examination to determine whether quality activities and related results comply with planned arrangements and whether these arrangements are implemented effectively and are suitable to achieve objectives. DIN ISO 8402 (4.9)
Quality audit finding A fact established during a quality audit and substantiated by objective evidence. DIN ISO 8402 (4.10)
Quality representative (QR) Person appointed by the supplier's management to establish and maintain the quality management system.
Quality reports Condensed presentation of quality capability.
Quality-related costs Both the costs incurred in ensuring and assuring satisfactory quality and the losses incurred when satisfactory quality is not achieved. DIN ISO 8402 (4.2)
Quality capability Ability of an organisation or its elements to realise an entity that fulfils the quality requirements for that entity. DIN 55350/T11
Acceptable quality level (AQL)
Quality index (QI)
Quality loop Conceptual model of interacting activities that influence quality at the various stages, ranging from the identification of needs to the assessment of whether these needs have been satisfied. DIN ISO 8402 (4.1)
DIN ISO 9004 (5.1)
DIN ISO 9004-2 (4.4.2)
Quality control The operational techniques and activities used to fulfil requirements for quality. DIN ISO 8402 (3.4)
Quality management system The organisational structure, responsibilities, procedures, processes and resources for implementing quality management. DIN ISO 8402 (3.6)
Quality management manual (QMM, QAM) Quality assurance manual, also quality management manual (QMM): a document stating the quality policy and describing the quality management system of an organisation. DIN ISO 8402 (3.12)
DIN ISO 9004 (5.3.2)
DIN ISO 9004-2 (4.4.3.1)
Quality management plan A document setting out the specific quality practices, resources and sequence of activities relevant to a particular product, project or contract. DIN ISO 8402 (3.13)
Quality characteristic Characteristic that contributes to determining quality. DIN 55350/T11
Quality planning or advance quality planning (AQP) The activities that establish the objectives and requirements for quality as well as the requirements for the application of quality management system elements. DIN ISO 8402 (3.3)
Quality policy The overall intentions and direction of an organisation with regard to quality, as formally expressed by top management. DIN ISO 8402 (3.1)
DIN ISO 9004 (4.2)
DIN ISO 9004-2 (4.2.1)
Quality control chart (QCC)
Quality assurance (QM demonstration) All the planned and systematic activities implemented within the quality management system and demonstrated as needed to provide adequate confidence that an entity will fulfil requirements for quality. DIN ISO 8402 (3.5)
DIN ISO 9004 (4.4)
DIN ISO 9004-2 (4.4)
Quality assurance agreement (QAA) Quality assurance measures contractually agreed with a supplier.
Quality objectives Quality management objectives set by company management DIN ISO 9004 (4.3)
DIN ISO 9004-2 (4.2.2)
Quality Function Deployment (QFD) Systematic method of quality planning, consisting of consumer/customer surveys, evaluation, assessment and definition of the procedure for meeting certain quality characteristics while taking economic efficiency into account.
Quality Policy Deployment (QPD) Systematic implementation of the quality policy at the various hierarchical levels and tracking whether and how it is effective.
Review Review (checking) of an existing state or of the effectiveness of an implemented change DIN ISO 9004 (5.5)
Risk priority number (RPN)
Traceability The ability to trace the history, application or location of an entity by means of recorded identifications. DIN ISO 8402 (3.16)
Simultaneous Engineering (SE) Simultaneous engineering
Seven tools This term covers common statistical methods and tools, in particular methods and diagrams for representing and analysing relationships (Pareto charts, fishbone diagrams, histograms, control charts, X/Y diagrams, bar and pie charts, checklists in matrix or table form).
Safety The state in which the risk of harm to persons or damage to property is limited to an acceptable level. DIN ISO 8402 (2.8)
Specification A document stating requirements. DIN ISO 8402 (3. 14)
Statistical Process Control (SPC) Statistical process control: Consistent application of statistical methods to control a process. Both quantitative and qualitative characteristics of a product or process can be monitored. {Maintaining a certain quality, not improvement}
Taguchi method Experimental method (see 'Design of Experiments') which aims to analyse a manufacturing process as to which influencing factors affect the process and how strongly, to align it to the smallest possible scatter of characteristic values, to reduce the number of experiments required, and which focuses on the robustness of processes.
Time-based management Time management: lead times, storage times, delivery times etc.,
Total Quality Management (TQM) Management approach of an organisation, centred on quality and based on the participation of all its members, aiming at long-term success through customer satisfaction and benefits to the members of the organisation and to society. DIN ISO 8402 (3.7)
UEG lower control limit:
Subcontractor The organisation that provides a product to the supplier. DIN ISO 8402 (1.13)
Cause-and-effect chain Ishikawa fishbone diagram
Validation Confirmation by examination and provision of objective evidence that the particular requirements for a specific intended use have been fulfilled. DIN ISO 8402 (2.18)
VB Confidence interval
Procedure A specified way to perform an activity. DIN ISO 8402 (1.3)
Procedure instruction Documentation of a procedure (sequence) DIN ISO 8402 E (D)
DIN ISO 9001
DIN ISO 9004-1
Verification Confirmation by examination and provision of objective evidence that specified requirements have been fulfilled. ISO 2.17
Contract Requirements agreed between a supplier and a customer, transmitted by any means.
Confidence interval (CI)
WA Value analysis (project-oriented problem-solving system)
Warning limit (WL)
Zero-defect programme Defect prevention programme incorporating the wishes and experience of the purchaser/customer.
Random variation range

(ZB, ZSB)

Random variation range
Dependability Collective term used to describe availability performance and its influencing factors: reliability performance, maintainability performance and maintenance support performance. ISO 2.5
Dependability characteristic Quality characteristic contributing to dependability DIN 55350/T11