Knowledge
Material data sheet: Grey cast iron with lamellar graphite (GG)
Typical properties of grey cast iron with lamellar graphite
The table below shows the most important properties of grey cast iron with lamellar graphite.
| Grade designation | GG 15 | GG 20 | GG 25 | GG 30 | GG 35 |
| Matrix structure | ferritic-pearlitic | pearlitic | |||
| Tensile strength (N/mm2) | 150 to 250 | 200 to 300 | 250 to 350 | 300 to 400 | 350 to 450 |
| Yield strength 0.1 (N/mm2) | 98 to 165 | 130 to 195 | 165 to 228 | 195 to 260 | 228 to 285 |
| Elongation at break (%) | 0.3 to 0.8 | 0.3 to 0.8 | 0.3 to 0.8 | 0.3 to 0.8 | 0.3 to 0.8 |
| Brinell hardness HB 30 | 125 to 205 | 150 to 230 | 180 to 250 | 200 to 275 | 220 to 290 |
| Modulus of elasticity (kN/mm2) | 78 to 103 | 88 to 113 | 103 to 118 | 108 to 137 | 123 to 143 |
| Compressive strength (N/mm2) | 600 | 720 | 840 | 960 | 1080 |
| Flexural strength (N/mm2) | 250 | 290 | 340 | 390 | 490 |
| Shear strength (N/mm2) | 170 | 230 | 290 | 345 | 400 |
| Poisson's ratio | 0.26 | ||||
| Bending fatigue strength (N/mm2) | 70 | 90 | 120 | 140 | 145 |
| Tension-compression fatigue strength(N/mm2) | 40 | 50 | 60 | 75 | 85 |
| Fracture toughness (N/mm3/2) | 320 | 400 | 480 | 560 | 650 |
| Density (g/cm3) | 7.10 | 7.15 | 7.20 | 7.25 | 7.30 |
| Specific electrical resistance (Ohm*mm2/m) | 0.80 | 0.77 | 0.73 | 0.70 | 0.67 |
| Specific heat capacity (K/kg*K) between 20 and 200°C between 20 and 600°C | 460 535 | ||||
